About this item

Features: - On/off switch, 6ft power cord, Rubber feet for nonslip, Extra metal ball, Made from durable black glossy plastic

Instructions to get started: 1) Remove the unit from the packaging. 2) Place the unit on a flat sturdy surface near an outlet, safe from pets and small children

3) Pour roughly 2 tablespoons of sand onto the top surface and use a fork to spread evenly (it should be a thin layer covering the entire surface. Use a combination of scraping with the fork and tapping the side of the bowl until smooth. 4) Place a metal ball in the center of the sand

5) Plug the power cable into an outlet and turn on the switch making sure the cable is out of the way and not a tripping hazard. 6) The ball should attach to the magnet underneath the cover and begin creating a design. 7) , sit back and enjoy.

Features: - On/off switch, 6ft power cord, Rubber feet for nonslip, Extra metal ball, Made from durable black glossy plastic

Instructions to get started:

1) Remove the unit from the packaging.

2) Place the unit on a flat sturdy surface near an outlet, safe from pets and small children

3) Pour roughly

2 tablespoons of sand onto the top surface and use a fork to spread evenly (it should be a thin layer covering the entire surface. Use a combination of scraping with the fork and tapping the side of the bowl until smooth.

4) Place a metal ball in the center of the sand

5) Plug the power cable into an outlet and turn on the switch making sure the cable is out of the way and not a tripping hazard. 6) The ball should attach to the magnet underneath the cover and begin creating a design. 7) , sit back and enjoy

Product Description

This sand art bowl can create over 80 designs completely adjustable by you! Its soothing, mesmerizing patterns can relax you and destress your mind. A small metal ball smoothly glides through the fine sand to endlessly produce symmetric designs in the sand as you relax. Tips for changing the designs: 1) Remove the metal ball from the sand then remove the cover by lifting it from the base. The cover is attached to the base with magnets. 2) Remove the magnet and place it in a new slot for a different design. 3) For more designs, place the second magnet into a different slot for multiple designs at once (use a corresponding ball for each magnet) 4) Once you have made the switch, simply place the cover back on and place your metal ball or balls in the sand. The product is designed for the United States (2-prong plug) standard 120V and 50/60Hz AC electricity. For international orders using 220V, a step-down voltage converter adapter will be required. Please check your country’s voltage before plugging in the device and reach out if you’re unsure. Safety: The bowl is not meant to run 24/7. Do not leave the device on while unattended and make sure you shut it off if you’re going to be away for an extended period of time.

How to Use:

Take it out of the box.

Put it on a flat table near a power outlet, away from pets and kids.

Sprinkle about 2 spoonfuls of sand on top and spread it out evenly with a fork.

Put a metal ball in the middle of the sand.

Plug it in and turn it on. Make sure the cord is not in the way.

The ball will stick to a magnet under the cover and start making patterns.

Now just sit back and enjoy.